I wanted a new low profile quad to complete my collection. I'm very happy with this setup.
Update: Finally I've replaced Cobra motors by Armattan oomph Velvet motors. I've also changed motors and FC soft mount and gopro support. And a 1000uf capacitor has been added on the PDB. Cossfire micro rx antenna has been modified. It flies very great now. My 1st good flight with this setup:
. Check PIDS on photo.HD Camera |
GoPro Hero5 Session, 1080p
(303 builds)
Amazon.com
|
$230.41 |
HD Camera |
GoPro HERO5 Session
(303 builds)
Getfpv.com
|
$199.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
How your Matek with 1 capacitor?my build https://rotorbuilds.com/build/8736 has used 3 capacitors.
I've only one 1000uf capacitor plugged in parallel of the power connector on the PDB. I'll post a photo later...