Splitshark is a 3", 3S, 1106 HD rig that comes in at 175g all up!
Frame |
Splitshark
(9 builds)
Falconmultirotors.com
|
$35.00 |
Flight Controller |
HGLRC F4 Zeus F4 Flight Controller Integrated with OSD BEC PDB AIO 15A BLheli_S 4 In 1 ESC for RC Racing Drone
(15 builds)
Banggood.com
|
$49.20 |
Motors |
4 x EMAX RS1106 6000kV Brushless Motor
(35 builds)
Pitchrollyaw.net
|
$51.96 |
Propellers |
RotorX RX3025 Propeller Set
(4 builds)
Getfpv.com
|
$2.99 |
FPV Camera |
Banggood.com
(80 builds)
Banggood.com
|
See Site |
FPV Transmitter |
TBS UNIFY PRO 5G8 HV - SMA (2S-6S Version)
Pitchrollyaw.net
|
$49.99 |
Receiver |
FrSky R-XSR 2.4GHz Micro ReceiverDefault Title
(937 builds)
Racedayquads.com
|
$21.99 |
Batteries |
Tattu 3S 850mAh 75c Lipo Battery
Fpvheadquarters.com
|
$14.50 |
Radio |
FrSky Taranis QX7S 2.4GHz RC Transmitter - Carbon or Blue
(50 builds)
Racedayquads.com
|
$184.99 |
Goggles |
Fat Shark Dominator HD3 Core FPV Goggles
(87 builds)
Getfpv.com
|
$399.99 |
HD Camera |
GoPro HERO6 Black
(9 builds)
Getfpv.com
|
$399.99 |
HD Camera |
GoPro HERO5 Session
(303 builds)
Getfpv.com
|
$199.99 |
Video Receiver |
ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module
(178 builds)
Getfpv.com
|
$159.99 |
Battery Charger |
ISDT SC-608 150W 8A MINI Smart LCD Battery Balance Charger AU Warehouse
(14 builds)
Banggood.com
|
$54.27 |
Soldering Iron |
Weller WESD51 Digital Soldering Station
Amazon.com
|
See Site |
@lazd The RS1106 thrust tests and guidance by EMAX indicate only the 4500Kv version is optimized for 3" props like RX3025. Is there a reason you went with the 6000Kv?
Excited about this one! Would be really cool if you were able to design a tpu camera protector of some sort.
Any chance it’ll fig an Asgard, or will the input tab/pads run into that rear standoff? RX1404 spinning triblades on 4s might be pretty zippy
Hmm yeah I think the Asgard would hit the standoffs... I think the Zeus AIO is more than enough power for this rig, so there's really no need to go for a 30.5mm AIO, and with the softmount adapters or the suspension mount, it's easy to mount the Zeus on top of the Split.
I have been toying with ideas for a canopy and also designed more encompassing camera struts, but nothing has stuck yet. When it does, it'll be up on Thingiverse!
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
nice! what adapter are you using to mount the zeus on top of the split board?
I'm using this adaptor I designed specifically for this project: https://www.thingiverse.com/thing:2638479
Another adaptor I designed for Featherlight can also be used: https://www.thingiverse.com/thing:2638475
I just did the same build and didnt have to use any adapter, i just used the 20mm runcam split screws from the bottom all the way up with 2 nuts inbetween each layer and the brass standoffs between the 2 split boards. worked great. .... but then again i used the split mini
so i guess thats not really relevant.
Post your build, ElectroGibit! I haven't seen a Split Mini Splitshark yet!
Alright,I just finished it last night so I gotta organize all the pics and write it up, will probably do it this weekend
Hey @lazd I ended up using a massive droner frame, but here ya go! https://rotorbuilds.com/build/10915