Durafly Tundra V2 teknofreak

By DiAleksi on Oct 17, 2021

5  142  4

Aye, my tail planes journey continues. Now I'm interested in STOL planes and Durafly Tundra V2 got chosen.

I live near water and in the snowy country in whinter time. This tundra has the floaties and the skis.
I used my old and trusty Matek F765-WSE FC with iNav for partial flying automation and camera control.

My additions by now:

  • Designed better looking front lid and fpv-pod to use instead ugly wooden version
  • Tail camera
  • Tail surface mounted gps module
  • Mount for easy acces to the FC
  • Top universal mount with M3 threaded intserts

Camera control functions:

  • Switch position 1: Tail
    • Tail camera with simplified OSD for cleaner view
  • Switch position 2: Front centered
    • Front camera with data overflooded OSD. Usually used as a main camera
  • Switch position 3: Front with gimbal
    • Front camera with minialistic OSD for cleaner scenery view
    • Throttle set on hold, rudder centered
    • Throttle stick controls gimbal's tilt servo and yaw controls pan servo


Part List


Durafly Tundra V2 (PNF) - Green/Silver - 1300mm (51") Sports Model w/Flaps

Flight Controller

Matek Systems F765-WING STM32F765VI Flight Controller Built-in OSD for RC Airplane Fixed Wing (5 builds)

FPV Camera

Foxeer Razer Micro 1/3 CMOS 1.8mm Lens 1200TVL 4:3/16:9 NTSC/PAL Switchable FPV Camera For RC Drone (2 builds)

FPV Camera

Caddx Ant Analog FPV Camera (3 builds)

FPV Transmitter

ImmersionRC Tramp 2-6S HV 25-600mW 5.8GHz VTX (US Version) - U.FL (52 builds)


SINGULARITY 5.8 - TrueRC Canada (34 builds)


TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER (1491 builds)


Turnigy 2200mAh 3S 25C LiPo Pack (5 builds)


CNHL 4000mAh 14.8V 4S 30C Lipo Battery
See Site

3D Printed

Durafly Tundra V2 fuselage lid fpv-pod by DiAleksi
See Site

3D Printed

Durafly Tundra BN-220 GPS tail mount by DiAleksi
See Site

3D Printed

Durafly Tundra tail camera mount 14x14 by DiAleksi
See Site

3D Printed

Durafly Tundra another universal mount by DiAleksi
See Site

3D Printed

Spinner for M6 shaft by DiAleksi
See Site

3D Printed

FC mount for Durafly Tundra by DiAleksi
See Site

Misc Parts

Beitian Dual BN-220 GPS GLONASS Antenna Module TTL Level RC Drone Airplane (68 builds)
Show stores (8)


Sign in to comment

Suteki   Oct 19, 2021  

Nice one bud, I have a Grand Tundra set out with iNav and on the Matek 765 Wing board. Have you got any flight footage? I took this one awhile ago, I never went with a pan servo on this (I do have one on a Slowpoke).

Took this video awhile ago;


DiAleksi   Oct 19, 2021 

Nice! I've just built it. Waiting for free time and calm weather for maiden, trimming and other setup. Then I can fly in rough weather too, when I get familiar with it.

-X3-   Oct 18, 2021  

Nice ! Do you use 2 vifly cam switchers for your 3 cams ?

DiAleksi   Oct 18, 2021 

F765 FC has natively two camera switch. So no need for separate switch as there is only two camera on this plane.
But I used previously some no-branded switch in Ranger with three cameras.

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more