This is my third quadrocopter and second Lumenier frame (came from the QAV400 down to this). As with all my builds I have a great focus on aesthetics and durability. Everything is soldered on or has solid connections. Loctite whereever feasible. Liquid tape covering screws as there is danger of damaging the cables or the GoPro. Cables run as short as possible and each component is necessary (for example the VTx powers both the camera and the Naze32 and receiver). No OSD because a battery alarm via telemetry (Futaba system external voltage sensoring) is enough for me.
Frame |
QAV250 Mini FPV Quadcopter v1.1 - Carbon Fiber Edition
(5 builds)
Getfpv.com
|
$99.99 |
Frame |
QAV250 Aero Guard
Getfpv.com
|
$8.99 |
Frame |
QAV250 CF Vibration Damping Camera Plate
Getfpv.com
|
$7.99 |
Frame |
QAV250 Angled Motor Mount Extensions
Getfpv.com
|
$18.74 |
Flight Controller |
Acro Naze 32
Rotorgeeks.com
|
$19.99 |
ESCs |
4 x Hobbywing X-Rotor 250 size ESC - 10amp (OPTO)
Hobbyking.com
|
$40.44 |
Motors |
4 x MN2206
Rctigermotor.com
|
$103.60 |
Propellers |
Graupner C-Prop 6x3 (2 Sets) Black
Getfpv.com
|
$3.99 |
FPV Camera |
SONY Super HAD CCD 600TVL D-WDR DNR Board Camera For FPV
(2 builds)
Securitycamera2000.com
|
$29.99 |
FPV Transmitter |
ImmersionRC 5.8GHz 600mw Audio / Video Transmitter
Getfpv.com
|
$39.99 |
Antenna |
ImmersionRC 5.8 GHz SpiroNET Antenna Set RHCP (SMA Connector)
(18 builds)
Getfpv.com
|
$39.99 |
Batteries |
SLS XTRON 1550mAh 3S1P 11,1V 40C/80C
(2 builds)
Stefansliposhop.de
|
See Site |
Misc Parts |
Loctite Adhesives
Loctiteproducts.com
|
See Site |
HD Camera |
GoPro Karma Grip for HERO5 Black
Getfpv.com
|
$299.99 |
HD Camera |
LayerLens for GoPro 3 & 4
Getfpv.com
|
$24.99 |
HD Camera |
GoPro HERO5 Session
(303 builds)
Getfpv.com
|
$199.99 |
HD Camera |
GoPro Session
(62 builds)
Getfpv.com
|
$149.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Very clean. What do those motor mounts do for you?
Can't say at the moment, haven't flown outside with this yet.
What's the advertised function? I'm just curious because I normally see the motors attached directly to the arms.
You can mount 6" props instead of 5" and the motors are tilted 10° forward, which reduces air drag as the main body is tilted less in fast forward flight.
Oh great! Hopefully the larger props allow for longer flight times.
Now that I'm in front of my computer I can take a closer look at this. What did you use to cover your standoffs over your Aero Guard? Is that just black tape? Why not leave them exposed?
It's matte black gaffa tape (removable), I didn't like to have the aluminium standoffs poking through so to create a uniformly black aero guard I covered them.
Black aluminium threaded standoffs are a pain to find. A few months ago I once saw them and I can't find it again...
That works! It seems builds lately are just as much about aesthetics than performance.
In my case I will need to swap out the ESCs for KISS 12A ones to get Oneshot and active breaking. Then the fun will begin.
I saw some talk about the KISS ECSs on this build saying they catch fire. I don't know how true that is, but it's something to look into.