Armattan Rooster

By the_original_one on Feb 04, 2018

9  2,679  0

Here is my Armattan Rooster! I was so hyped about this frame when it was teased back in November. The chameleon was my first serious fpv build and I was super excited to build on its successor. Most of these parts were purchased around black Friday with the exception of the esc's and the camera.

Unfortunately I got one of the frames with the horribly stamped hardware, I was only able to use about 10 of the flat top bolts that are used for the top plate and rear assembly. All of the hardware securing the the arms and cage on the bottom half I had to replace with cup head bolts. Good news is that I have zero issues with arm movement since I could get those suckers so tight.

Hoping to get some warmer weather soon to maiden this beauty. Cheers!

Photos

Discussion

Sign in to comment

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more