Chameleon Build

By tweakfpv on Mar 26, 2017

16  2,623  10

Freestyle quad build, for equal parts efficiency and power .

  • OSD via BFF3
  • VTX control over SmartAudio and PID tuning over S.port using the Taranis LUA scripts.
  • Pagoda Antennas built in house.

Photos

Discussion

Sign in to comment

NoveFpv   Apr 21, 2017  
1

Which capacitors are you using on the escs?

tweakfpv   May 28, 2017 
1

They are 25v 220uF caps.

Prowler   May 22, 2017  

How did you mount your Unify Pro? I ended up breaking it while trying to find a suitable place to mount it. Do you have any close ups of the pigtail where it connects to the Unify?

tweakfpv   May 28, 2017 

I took the pigtail off and turned it around back under the heatshrink (up to halfway) - there's a close up of that there. Word of warning though, you need to peel away the black silicone from where the antenna is glued on as that does a really good job of preventing the antenna ground from connecting once you've pulled the pigtail out from under it.

Flying Aboo   Apr 28, 2017  

I am going to be putting a BetaFlight F3 board in a Chameleon 5". What I wanted to ask is the power leads from the FC you have run through the back plate.

Could I get away with using a shorter lead and turning the battery the other way in order for it to reach?
How long is the lead you used?

tweakfpv   May 01, 2017 

Hi FunnyFluffer,

I used a shorter lead originally and ran it through the back plate without success but you rotated the BFF3 90 degrees you might be able to bring it up the side.

The top plate is quite low down so everything is very close to the props and I decided running the lead out the back was the safest option but possibly not the best for weight.

AncientJ   Apr 10, 2017  

Looks like you had to clip the mounting flange on the SMA pigtail. I was wondering about that. Did you use a screw on the other side of the flange to secure it, or do you just let the antenna hold it on?

tweakfpv   Apr 10, 2017 
1

You're correct. I tried using a small nut on the other side but that didn't leave enough thread so I settled on a dab a hot glue to hold it in place and just tighten down the antenna nice and tight :)

animatedlim_fpv   Mar 27, 2017  

What is your auw? Wth and without GoPro and lipo?

tweakfpv   Mar 28, 2017 

Not sure about weight sorry!

Guides & Reviews

59 8,457  18
Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more