Idk green and gold looked posh. Tpu cost a fortune but hope y'all like it :).
Opinions as always (some are just copy/pastes from past builds but it's just nice to give an opinion anyway):
Fouride Frame: It was just a really nice frame (I got the 5" one) and looked unique but also well made. Its a true __ to put together and required a bit of sanding on the central standoff hole, but all in all a sensationally well designed frame. Carbon is all chamfered too contrary to the pictures showing it to be straight.
Goku GN745 and HM600: I got these for £70 on banggood (yeah I know...) and the f745 chip, 40a of power and a 600mw vtx seemed a good deal. The board is easy to solder to and comes with black wiring and xt60 (which is cool) and yeah: its good. I got a bit of magic smoke funnily enough this build but nothing seems broken... All works.
Caddx Ant: Nice cam, not the greatest image but completely passable and honestly just a good cheapo thing to throw on a quad/wing if you need a cheap cam (it sounds obvious, I know). Would be nice to have a full case version to make mounting easier but it's about $12.50 on TBS so who cares?
Toka 2004 2900kv: Really nice looks, quality, packaging etc. Wire is really thin which is good for weight saving; T mount too. I believe these are actually unibell but someone said something to the contrary before... in any case they are really nice.
Thanks for viewing folks!
Frame |
FPVCycle Fouride Frame- Vista Compatible (Choose Size)
(18 builds)
Fpvcycle.com
|
$29.74 |
Flight Controller |
Flywoo GOKU GN745 2-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC
(8 builds)
Racedayquads.com
|
$139.99 |
Motors |
4 x Diatone Mamba Toka 2004 2900Kv Micro Motor
(3 builds)
Racedayquads.com
|
$67.96 |
Propellers |
GemFan Hurricane 4023 3-Blade
(30 builds)
Airbladeuav.com
|
$2.99 |
FPV Camera |
CADDX ANT 4:3 SILVER NANO FPV CAMERA
(136 builds)
Pyrodrone.com
|
$17.90 |
FPV Transmitter |
Flywoo GOKU HM600 VTX 5.8GHz 37CH 25/50/100/200/600mW Switchable NTSC/PAL FPV Transmitter Support Pitmode Betaflight OSD IRC
(4 builds)
Uk.banggood.com
|
$32.54 |
Antenna |
2pcs Foxeer 5.8G Lollipop 3 2.5DBi Omni FPV Antenna RHCP SMA/RP-SMA for RC Drone Airplane
(29 builds)
Banggood.com
|
$19.99 |
Receiver |
RadioMaster R81 2.4GHz Frsky D8 Protocol Micro Receiver
(7 builds)
Racedayquads.com
|
$16.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
It's gorgeous.. What brand and color tpu is that? I haven't seen that color of green in tpu before. Super clean looking! I bet it's a ripper with those motors. I have the exact same build, but digital and with the fpvcycle 2203 3450kv, and it's a screamer on 4s. I just stole those motors for a 5" toothfairy 2 though, so I may throw some 2004's on. Love the 4" platform!
The TPU is Leoplas Emerald green :) It rips hard, yeah! I'm converting my 5 inch fouride to a 4 incher soon so will have the exact same power setup as you!