Codename "Dacha" [3" - sub 250g - analog - flySky]

By SeeSharp on Jun 30, 2021

9  675  5

It flies cool, in my opinion, a large throttle reserve

  • iFlight XING2 1404 3800kv


  • The cam has changed from a Toothless 2 Micro to a Toothless 2 Nano (see photo at the end).
  • And I prefer to use HQProp T3X3X3 (more durable) instead of Emax AVAN. Although if you want more calm flights, then the Gemfan 3016 Hurricane is very good.
  • Shark Fin with antenna mount for lollipop 3:


Part List


GEPRC GEP-PX3 3 Inch 140mm Wheelbase 3mm Arm 3K Carbon Fiber Frame Kit for RC Drone FPV Racing (4 builds)

Flight Controller

Diatone Mamba F405 Mini Mk2 F30 Mini 2-5S 20x20 Stack/Combo (F4 FC / 30A ESC) (22 builds)


4 x iFlight Xing2 1404 3800kv Motor (9 builds)


6 Pairs Emax AVAN Mini 3 Inch 3X2.4X3 3-blade RC Drone FPV Racing Propeller CW CCW (65 builds)


HQProp T3X3X3 3-blade 3Inch Poly Carbonate Propeller 2CW+2CCW (4 builds)


Gemfan 3016 Hurricane 3" 3-Blatt Prop, 1.5mm Welle (3 builds)
See Site

FPV Camera

Foxeer Toothless 2 Mini Full Case 1200TVL CMOS 4:3/16:9 PAL/NTSC FPV Camera (1.7mm) - Choose Your ColorRed (21 builds)

FPV Transmitter

Diatone Mamba TX400 Video Transmitter - Unmanned Tech Shop (3 builds)
See Site


Foxeer Lollipop RHCP Micro u.FL (2 builds)


1.7g Fli14+14CH Mini Receiver Compatible Flysky AFHDS-2A w/ RSSI Output for FS-i6 FS-i10 Turnigy I6S (56 builds)


CNHL MiniStar 14.8V 4S 450mAh 70C LiPo Micro Battery - XT30 (14 builds)


FlySky FS-i6 2.4G 6CH AFHDS RC Radion Transmitter With FS-iA6B Receiver for RC FPV Drone (15 builds)


Eachine EV800 5 Inches 800x480 FPV Goggles 5.8G 40CH Raceband Auto-Searching Build In Battery (26 builds)
Show stores (6)


Sign in to comment

iversonwin   Aug 06, 2021  

Nice! One question: How did you fit the Avan 3 inch props onto the Xing2 motors? I found that the center pitch was hitting the top circumference of the bell. I wanted to use this props as others have suggested it goes well with this motor in simliar weight builds.

Thanks in advance!

SeeSharp   Aug 06, 2021 

Yes, they touch the bell and even get a little crumple when screwing, but this does not cause problems.
But in the end, I prefer HQProp T3X3X3 Poly Carbonate more.
They behave almost the same, maybe a little heavier, but noticeably stronger than AVAN

dafunk   Jul 09, 2021  

Nice build...
Why did you use washers for the motor screws? Try

SeeSharp   Jul 15, 2021 

It was temporary, but now I have no reason to fix it differently because of laziness )))

dafunk   Jul 16, 2021 

Enjoy it then. If you ever remove them I would be interested to know if it flies noticeably better. In theory masses far from the center affect responsiveness but I wonder how true that is

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more