plasticSurgeryDisaster (pusher)

By BUDLoNG on Jan 30, 2021

8  270  2

I still have parts from my first tinyhawk drone and i am determined to use everything until it works no more :)
the frame is sandwiched between the fc and vtx/rx
The frame is cracked in two spots from a previous build and crash. I super glued and used some tape.
the motors have plugs soldered back onto them.
I had a lot of issues with the fc video in.. but it turns out the two cameras i was testing with were both crapped out.... took a while but finally got everything working.
I spaced on putting the third bolt on some of the motors. The RR ripped off and stripped out the threads... fortunatly i still have more tinyhawk motors :)
as for landing i fly over a bush and cut the power ;)



Sign in to comment

KristofFPV   Feb 06, 2021  

Are you running on 2S batteries on these 0802 16000 kV motors? Are they not too hot after the flight?

BUDLoNG   Feb 06, 2021 

yup 2s.. they get warm ~ hot depending on my level of aggressiveness. Never scalding though.
I used to run my 2s 300 on my THii daily....
I haven't melted them yet.

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more