GnarlyFPV V110X Build *lost*

By BaTTaN on Jan 03, 2021

12  190  0

Spare Parts build! GNarlyFPV 65mm old style Primo.

I have run everthing from 1s 5amp 1103 18000kv then 1s and 2s 6amp 1103 8000kv all with good results. The best and last setup was a 2s only betafpv 12amp 1103 8000kv all with Caddx Ant Echine Nano 400mw VTX and Tiny D8 RX installed due to space issues. The Tiny D8 was my downfall as I normally run crsf and had flown two of my other micros "crsf" before flying this one at the lake. I ended up getting an RX loss and flowting down into the lake. Here is it's last flight -=>

Note - I have a GnarlyFPV Primo 3 inch on the way with Motors and Two new AIO's to try out.

1/23/2020 Update

Well I hate what GarlyFPV has done with their new frames! Hate is not a strong enough work actully. I tracked down one of these however and plan on doing a new build with parts targeted spicificly for this model. Its going to be a little BAMF!

Photos

Discussion

Sign in to comment

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more