Beta95X Pusher

By wrong17 on May 19, 2021

2  197  0

This is an older build that did not last long. Meaning I built it and took it apart in a matter of days. I finished building it on November of 2020 but never published, it stayed as a Mockup in RotorBuilds. The reason why I finally publish it is because I wanted to use it as a comparison to the new build I just finished, the Beta95x v3.
So, why did I not like this build? To make a long story short, this quad could not do anything better than the iFlight DC2 that I have already have. If you have not seen the DC2 that I have built, you might say I am comparing to apples to oranges because they are different quads. Here is a link to the first build of the DC2:

This build is not the newest version that is evern better (lower weight and new props). The DC2 has the same props guards as the 95x, uses a Caddix Vista, and carries a HD camera. But yet, it handles better, no jello in the FPV video, and most importantly it is significantly quieter. With some better PID tuning the 95X’s handling will improve, but nothing can be done about the noise. I would think it would be quieter because it was lighter. But it seems that a pushed quad setup will make it louder.

The only thing this quad has going for it is the slightly smaller footprint. You can probably squeeze it between smaller gaps. Other than that, the noise alone is a no go for me. You need to keep in mind, this is all in comparison to the DC2 that I would rather fly than a Beta 95x Pusher.


Part List


BetaFPV Beta95X 2.5" Whoop Frame Kit (5 builds)


BetaFPV Beta95X V2 Pusher Conversion Kit

Flight Controller

BetaFPV F4 Brushless Whoop Flight Controller w/ 16A BLHeli32 4in1 ESC V2.0 - XT30 (2 builds)


BetaFPV 1106 4500Kv Micro Motor 4 Pack


HQ Prop 2.5x2.5x3 Tri-Blade 2.5" Prop 4 Pack - Choose Your Color (21 builds)

FPV Camera

Caddx Vista Digital HD System for DJI HD FPV (98 builds)

Antenna (2 builds)
See Site


Team BlackSheep TBS Crossfire Nano RX - Heli-Nation (1484 builds)


Team BlackSheep TBS TANGO 2 V3 PRO RC RADIO (104 builds)


DJI Goggles 2 (7 builds)

3D Printed

Betafpv Pusher Cinewhoop DJI Camera Mount by dengor
See Site

3D Printed

BETA95X PUSHER V2 PARTS by luismagfly
See Site

HD Camera

GoPro Bones - HERO10 Black (FPV Lightweight Drone Camera) (3 builds)
See Site

Battery Charger

HOTA F6+ 1000W 60A 1-6S Quad Channel AC/DC Smart Charger - Grey

Battery Charger

HOTA D6 PRO Dual Charger 1-6S AC200W/DC650W 15A w/ Wireless Cellphone Charging - Black (14 builds)

Soldering Iron

TS100 Portable Programmable Smart Soldering Iron (264 builds)


Lowepro QuadGuard BP X3 - Drone Backpack for 4 FPV Quad Racing Drones and 15" Laptop w/Exterior Mounts (Black)


iFlight Crystal HD Patch and Stubby 5.8GHz RP-SMA Antenna Set for DJI - LHCP - Carbon
Show stores (7)


Sign in to comment

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more