CineSploder (SOLD)

By gvngoheavy on Aug 25, 2020

4  755  5

I caved and needed to try these motors. Had a long debate with myself about whether to build a taycan with the 2203 or go full FPVCycle. Splorin won out.

ALLLLrighty. Its flying. and flying pretty good. Stock 4.2.2 BF setup is pretty solid. Some small oscillations when running it on 6s but nothing a little tweaking cant fix. Video will be posted as soon as I edit it. I gotta say, besides the way this thing flies and how FREAKIN quiet these motors are the flywoo bluetooth setup is absolutely brilliant. Any of my quads that has a spare uart is getting one of these little wonders.

To sum it up, yes these motors are as good and quiet as you heard they are. Honestly thinking about selling the 1507 motors off my cinerat for a second set of these.

I made a couple parts for the CineSplore. Ducts are the first to be posted. GP mount and sma mount coming soon, along with some ducts made to accept the LED kit from the Taycan MXC.

Ducts:
https://www.thingiverse.com/thing:4579229

Update 8-29-20
I finished printing my LED ducts and am pretty stoked on how they came out. My once relatively simple build is now a mess of wires, and im really hoping that im not going to have heat management issues with my vtx now. If I do then I guess the LEDs were fun while they lasted but really isnt the point of this quad and it flys just oh so nicely with my first iteration of the ducts.

Photos

Part List

Frame

FPVCycle CineSplore Frame (8 builds)
Fpvcycle.com
$49.99

Flight Controller

JHEMCU GHF405 BLHELI_S 35A 3-6S Whoop Style AIO (5 builds)
Pyrodrone.com
$65.99

Motors

5 x FPVCycle 23mm Short Motor - THE Cinewhoop motor (36 builds)
Fpvcycle.com
$99.95

Propellers

3 x Gemfan D76 Ducted 76mm 5 Blade Cinewhoop Prop (10 builds)
Pyrodrone.com
$8.07

Propellers

3 x Gemfan 75mm Ducted Props PC 3-Blade (13 builds)
Pyrodrone.com
$8.07

FPV Camera

Caddx Ratel Analog FPV Camera | USA ONLY (28 builds)
Caddxfpv.com
$19.99

FPV Transmitter

TBS Unify Pro32 Nano 5G8 V1.1 VTx Video Transmitter (400 builds)
Pyrodrone.com
$29.95

Antenna

TBS U.FL to SMA Extension 6cm (4 builds)
Pyrodrone.com
$4.95

Antenna

TBS Triumph Pro (SMA RHCP) Antenna (21 builds)
Pyrodrone.com
$19.95

Receiver

TBS Crossfire Nano Rx FPV Long Range Drone Receiver (1498 builds)
Pyrodrone.com
$24.95

Batteries

3 x GNB 4S 14.8V 1100mAh 130C LiPo Battery (11 builds)
Fpvcycle.com
$59.97

Radio

RadioMaster Boxer EdgeTX RC Radio Transmitter - Choose Version (28 builds)
Pyrodrone.com
$139.99

Goggles

ORQA FPV.One OLED FPV Goggles + Free Bonus (FPV.PRO Antenna Set, FPV.Connect, FPV.Battery) (4 builds)
Getfpv.com
$649.99

Goggles

FPV Drone Parts for – FPV Quad Drone Shop – Drone Racing Store (135 builds)
Racedayquads.com
$129.99

HD Camera

Insta360 GO - 180° 1080P 20g Action Camera (12 builds)
Getfpv.com
$199.99

HD Camera

2 x ONE R - Innovative action cams from Insta360 - Insta360 Store
Store.insta360.com
See Site

Hardware

Reptile Cloud Duct & Bumper Set - Choose Your Color (3 builds)
Racedayquads.com
$4.99

Hardware

6 x M3 Knurled Aluminum Standoff - 5Pcs. (Choose Size) (19 builds)
Pyrodrone.com
$17.94

Misc Parts

FLYWOO BT-NANO V3 Bluetooth Module for micro drone (4 builds)
Pyrodrone.com
$8.99

Misc Parts

DIATONE MXC TAYCAN Colorful SW2812 LED Ducts (2 builds)
Diatone.us
$16.99

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (178 builds)
Getfpv.com
$159.99

Radio Module

HappyModel ES24TX Slim Pro ELRS 2.4GHz RC Transmitter Module (8 builds)
Racedayquads.com
$47.99

Battery Charger

2 x ToolkitRC M8S 400W 18A 1-8S DC Smart Charger & Diagnostic Tool
Pyrodrone.com
$99.98

Battery Charger

HGLRC Thor 6 Pro Lipo Battery Parallel Charging Board
Pyrodrone.com
$37.99

Battery Charger

2 x ViFly WhoopStor 1S LiPo/LiHV 6 Channel DC/USB-C Battery Charger & Discharger for BT2.0 & PH2.0 (2 builds)
Pyrodrone.com
$59.98

Soldering Iron

MINI TS80 Digital OLED USB Type-C Programable Soldering Iron Station Solder Tool Built-in STM32 Chip (5 builds)
Banggood.com
$72.99

Soldering Iron

Hakko FX888D-23BY, 599B-02 Soldering Station with 599B Tip Cleaner, Blue/Gold (25 builds)
Amazon.ca
See Site

Tools

Mayatech Multifunctional Aluminum Alloy Shock Shaft Pliers Tool Wrench For RC Airplane RC Car RC Models Toys
Banggood.com
$12.99

Accessories

AOKoda Lipo to USB Power Converter QC3.0 Adapter Quick Charger for Smartphone Tablet PC
Banggood.com
$6.99

Accessories

BlitzWolf® BW-P9 10000mAh 18W QC3.0 PD3.0 Type-c + USB Ports Power Bank with Fast Charging Dual Input and Output for iPhone X X
Banggood.com
$13.99
Show stores (9)

Discussion

Sign in to comment

JC250   Nov 04, 2020  

What kinda flight time do you get out of this thing? I'm new to cinewhoops so excuse the question if its really stupid: is it possible to make a "longe range" cinewhoop cruiser? Want to kill two buirds with one stone. Thanks!

gvngoheavy   Nov 05, 2020 

OK... I have lots of thoughts on this. Ill try and consolidate these ramblings. Ive only gotten to fly this setup a handful of times. The last time I took it out it was pretty windy, landed at 3.7v per cell after 5min flight. Flying 1100mah 4s with full gopro setup. Im hard on my batteries and would normally fly them down to 3.4v per cell. 3.7v for me is right in the middle zone of a the flight. So yeah you could call this a longer flight time machine for cruising. That said I wouldnt call it a "long range" drone because you are not going anywhere quickly.

f8f0   Aug 30, 2020  
1

Just a suggestion on the ducts - you need the edge of the ducts closer to the edge of the props - https://fpvcycle.com/collections/props/products/gemfan-ducted-penta-blade-five-blade-props-76mm-3-prop-lemon-yellow-2cw-2ccw - read this.

Great job though, and great build!

gvngoheavy   Aug 30, 2020 

Prop to duct proximity has definitely been a consideration and was a concern prior to my first flights. I have about 6 more iterations of the design that just need to be printed. I have a good amount of experience with ducted builds Ive done in the past, from where I started with the nutmeg and cutting my own props to the squirt and mildly adjusting Shendrone ducts to squeeze them in. Something that I am primarily experimenting with on the current design is having a smaller diameter outlet than the overall diameter of the props, to play a bit with Bernoulli's pressure vs. speed principle. Basically you have to take the prop off to take the duct off which means that the prop creates pressure in the duct, elevating the wind speed as it passes through the duct, creating more thrust.

kwadkenstine   Aug 30, 2020 
1

Bernoullies equation . cool stuff (fluid flow principals) Still brings back exam horrors, Good to see a reference to science other than just (I Think Im not an idiot therefore what i say makes sense) Good work !

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more