Birdbrain RC Fortress 5

By BirdbrainRC on Mar 09, 2020

16  682  5

Trying something a little different, if I like it I'll probably end up running it as my race rig for the 2020 season.

My SKEW_R design worked pretty well last year, taking me all the way to the British Championship, but I did see a higher than optimal failure rate on the cross braces. Given the distance between motors, it's no huge surprise, but still annoying to have to keep making more only to destroy an hour's work in 4 packs on race day.

Thinking about the durability issue, I was thinking about how the SKEW_R uses 3 different thicknesses of carbon which adds a fair bit onto the manufacturing time, and thought, what if I could design a frame that only uses one thickness? I'd been tempted to try designing a box frame in the distant past, but wildly inconsistent thickness in my carbon sheets put me off (there's no benefit if I have to spend hours hand filing everything to be a snug fit!) Fortunately, moving to a new carbon supplier has much improved the tolerance on my sheet stock, and I thought it was now worth a shot.

Looking at my past race quads, I ended up thinking of my first "proper" race build, a GepRC Hawk. It flew great, making me think there might be something to the whole raised back motor idea (supposedly it has the benefits of clean air to the rear motors without needing to be a true stretch X), so I decided to try that too, tweaking the arms such that the rear motors are a bit over 16mm higher than the front. Once cut, I was delighted to find all the parts fitted together perfectly in a 3D jigsaw, with no slop to speak of. The weight, by pure fluke, comes in at exactly the same as the SKEW_R, 100g including 3D prints, however once screwed together, the frame is by far the most rigid I've made - hopefully that translates into toughness on the track.

As per usual, I ended up making the working area inside the quad extremely tight - everything does fit, but it's a pretty big effort to squish it in to 25mm stack height when the arms use the front and back 18mm of the body! I opted to put everything in the stack, and machined up a little carbon plate to fasten the XM+ side by side with the Matek VTX. A Hobbywing 60A stack provides the brains and brawn, and 2208 Xings looked great so I picked up a set to test. The Foxeer Predator has been a fave of mine for the past year, and when I saw Foxeer had just released a micro version with a full case and M12 lens I had to pick up a couple. Gemfan 51466 props and a Menace Thrasher round out the components, along with some Tinys LEDs Racelites on the back side of the front arms to make the quad a little more visible for any indoor events.

Photos

Discussion

Sign in to comment

TinysLEDs   Sep 15, 2020  

Check out the new SideFire RGB racelites for Vertical arm frames. https://tinysleds.com/collections/racelites/products/rgb-sidefire-racelitewire-leds-40mm

Nabla   Mar 17, 2020  

What is the weight of the frame?

butcher51   Mar 10, 2020  

Sweeet frame :) It will be available somewhere maybe?

sal.mars44K.C.   Mar 09, 2020  

cool i dig this , have u bashed it yet.?
seems stout!!

BirdbrainRC   Mar 10, 2020 

Thanks! Weather here hasn't been fantastic unfortunately - I did get a maiden in on a very windy day and it seemed fine, but in a couple of weeks I have an overnight fun fly at an indoor gokarting track, that should put it through its paces!

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more