RNGR - Source One 7" Long Range

By fly.615 on Jan 31, 2020

18  1,192  5

Wanted to build a long range setup for a while, after several months I finally feel like I have it built the way I want.

Initially wanted the Deadcat arms of the Source One, but was out of stock. So I went with X configuration and crossed fingers I wouldn't see props. Few test hovers fortunately didn't have any in view! Initially used a Spedix IS30 4-in-1 that I had in the drawer with varying 4s battery configurations and had voltage sags/brownouts at high-throttle. Making the move to 5s seemed logical and I'll likely experiment with Li-Ion packs before too long. Still relatively a work in progress!

Had to dial in some video/osd gremlins with the icons not being correct and interferance issues. A quick font reload and adding a shield between ESCs and VTX made great improvements.

Next on the list is working out battery life and doing some prop comparison between 7x4x3, 7x3x3, or bi-blade 7x4.5. Hoping to get 10-15 minutes of easy cruising.

Scales show dry weight of 630g and a hefty 923g AUW with RDQ 2200mAh 5s

UPDATE: 7/30 - Gone through a few iterations of this build now. I'm able to run a solid 7min with the 2200mAh 5s on HQ 7x4x3 which I found to provide the best control without sacrificing much fly time. Cruse speed is a modest 40mph and punchouts can reach nearly 100. Bi-blades weren't all that successfull and ended up feeling a bit too floaty and loose. I made a 4s Li-Ion pack out of 20700 cells and got 10 min of fly time, but I'm almost certain these 30A cells aren't enough as the pack is fairly hot coming down. Will likely try a 4s2p 18650 pack soon.

The untimely demise of my session and subsiquent move to an 8 Black necessitated trimming as much weight as I could out of the build. This included removing the arm and front guards, changing to a gopro stock mount, and gram-saving here and there. 668g/963g AUW with 2200mAh 5S

Photos

Part List

Frame

RDQ Source One V3 7" Long Range Frame - 6mm V0.2 Arms (11 builds)
Racedayquads.com
$29.97

Flight Controller

CLRACING F7 V2 DUAL
Cl-racing.myshopify.com
$34.99

ESCs

CLRacing 45A 32Bit 45A 2-6S 30x30 4in1 ESC (5 builds)
Racedayquads.com
$44.99

Motors

4 x BrotherHobby Avenger V2 2507 1850KvDefault Title (17 builds)
Racedayquads.com
$99.96

Propellers

HQProp DP 7X4X3 Propeller (Set of 4 - Light Grey) (56 builds)
Getfpv.com
$3.99

FPV Camera

RunCam Sparrow
Getfpv.com
$39.99

FPV Transmitter

RDQ Mach 3 Video Transmitter 25-1000mW 5.8GHz VTX - U.FL or MMCX (146 builds)
Racedayquads.com
$24.99

Antenna

TrueRC Singularity Long 5.8GHz SMA Antenna - Choose Version (19 builds)
Racedayquads.com
$19.99

Receiver

FrSky R9MM OTA 915MHz Micro Receiver - ACCESS (87 builds)
Racedayquads.com
$23.50

Batteries

2 x RDQ Series 18.5V 5S 2200mAh 80C Long Range LiPo Battery - XT60 (27 builds)
Racedayquads.com
$76.98

Radio

FrSky R9M Transmitter Module (72 builds)
Alofthobbies.com
$48.75

Radio

RadioMaster TX16S Multi-Protocol RF Module OpenTX 2.4GHz RC Transmitter w/ V3 Hall Gimbals (80 builds)
Racedayquads.com
$199.99

Radio

FrSky X-Lite 2.4GHz RC Transmitter w/ R9M Lite Combo - Black or Red (64 builds)
Racedayquads.com
$164.99

Goggles

Fat Shark Dominator V3 FPV Goggles (64 builds)
Getfpv.com
$299.99

3D Printed

TBS Source One Accessory Kit (12 builds)
Brain3d.co
$32.00

3D Printed

RDQ Mach 2 / Mach 3 Combo 30x30 Stack Mount - 3D Printed TPU - Choose Your Color (21 builds)
Racedayquads.com
$2.99

HD Camera

GoPro HERO8 Black
Bhphotovideo.com
See Site

Hardware

M3 Knurled Standoff w/ Small Step (1PC) - Choose Your Color & Size (7 builds)
Racedayquads.com
$0.40

Misc Parts

3 x 3-6s Tiny LEDs (14 builds)
Tinysleds.com
$7.47

Misc Parts

ViFly Finder 2 Buzzer - Lost Drone Finder/Locater/Alarm (156 builds)
Racedayquads.com
$12.99

Video Receiver

Furious True-D Diversity Receiver Module 5.8GHz System V3 Firmware 3.9 (30 builds)
Getfpv.com
$62.99

Radio Module

FrSky R9M Module (72 builds)
Pyrodrone.com
$49.99

Battery Charger

Hitech RCD 44245 RDX1 AC/DC Battery Charger/Discharger
Amazon.com
$71.99

Soldering Iron

UY CHAN Upgraded Original TS100 Digital OLED Programmable Pocket-size Smart Mini Outdoor Portable Soldering Iron Station Kit Emb (258 builds)
Amazon.com
$72.98

Accessories

FrSKY 900MHz Super 8 Antenna for R9M and R9M Lite Module - FCC Version
Rotorgeeks.com
$20.24
Show stores (10)

Discussion

Sign in to comment

Kwazy FPV   Aug 03, 2020  

Good build ! What is the gopro mount for the first picture ? Is it TBS ND Filter ?

fly.615   Aug 03, 2020 
1

Thank you! It's from Brain3D, has an integrated holder for the TBS filters

blade1496   May 22, 2020  

Nice build! How's the performance on 5s with the 2507 1850kv motors?

fly.615   May 23, 2020 

Thanks! It does pretty well considering how heavy it is. I settled on 7x3.5x3 which provided a good balance of handling and efficiency. I would probably have dropped to the 1700kV if I were to do anything different. Also this frame is quite heavy on its own.

simogere   Mar 08, 2020  

Good shot! I'm planning to do the same but with dead cat arms. Have you got any dvr to show?
On my 6'', using a 6s li-ion pack, I obtain 15-20 min flight time of cruising (without the session 5)

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more