Acrobrat clone

By deadmoo on Sep 10, 2019

2  405  6

Made will salvaged Furibee X140 BNF parts. Parts in list are just approximation of what came with the BNF.

Part List


FPVKing 163mm FPV Racing Drone Frame 3 Inch Carbon Fiber Quadcopter Frame Kit with Lipo Battery Strap (3 builds)

Flight Controller

Anniversary Special Edition Eachine Minicube Flytower 20x20mm Compatible Frsky Flysky DSM RX F3 ESC (19 builds)


4X Racerstar Racing Edition 1306 BR1306 3100KV 1-2S Brushless Motor CW/CCW For 150 180 200 RC Drone FPV Racing (4 builds)


HQProp T3X3X3 PC Propeller (Set of 4) (38 builds)

FPV Camera

Crazepony Caddx Turtle V2 FPV Camera HD 1080P/60fps Mini HD Cam DVR 800TVL CMOS 1.8mm Lens 16:9/4:3 NTSC/PAL Switchable with OSD

FPV Transmitter

Wolfwhoop Q4 5.8GHz VTX with MMCX Antenna Connector and 0.01/25/200/400/600mW 37CH Switchable FPV Transmitter with Smart Audio S (8 builds)


Realacc RHCP Super mini UXII Stubby 5.8GHz 1.6dBi FPV Antenna For TX RX Fatshark Goggles RC Drone (41 builds)


FrSky R9 Mini 900MHz Long Range Receiver (57 builds)


TATTU 650mAh 4S1P 75C 14.8V Lipo Battery Pack with XT30 plug (45 builds)
See Site


Tattu R-Line 850mAh 4s 95c Lipo Battery (27 builds)
See Site


Jumper T Pro V2 OLED Screen Internal 2.4G 1000mW ExpressLRS ELRS module Radio Controller


HDZero Goggle | HDZERO (18 builds)

HD Camera

GoPro Bones - HERO10 Black (FPV Lightweight Drone Camera) (3 builds)
See Site


Ummagawd Acrobrat Accessory Kit (5 builds)

Video Receiver

Avatar HD VRX Kit for Avatar HD Video System - Choose Version

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (179 builds)

Battery Charger

ToolkitRC M8 DC 300W 15A Battery Balance Charger Discharger for 2-8S Lipo Battery

Soldering Iron

MINI TS100 Digital OLED Programable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (264 builds)


IFlight Backpack Case with Radio Transmitter FPV Goggle Motor and Support Hang RC Drone FPV Racing (8 builds)


Lumenier AXII 2 5.8GHz Stubby 90° SMA Antenna - RHCP or LHCP (5 builds)

Misc Supplies

HDZero Goggle Expansion Module(V1 Without WiFi) | HDZERO
Show stores (11)


Sign in to comment

babipsylon   Nov 13, 2019  

Any idea if the sides will fit on original bottom plate?

deadmoo   Nov 16, 2019 

I would guess not. It is not an exact copy. It seems to be scaled down a bit.

babipsylon   Nov 09, 2019  

Is this an exact copy of the ummagawd frame? I ordered the acro 3 from bg, and there are some annoying differences:

Sadly, the original ummagawd dampners for the sides do not fit in the smaller holes of these sides. And that's the whole point of this frame, good dampners, the ones included here are not as good.

Be aware that this frame is less height than original (3mm difference +-). Because the damners are much smaller. Only very tight stacked pcb's will fit underneath the hood, sadly. It's also a few mm less wide than original frame, so small cameras don't fit well (frame too wide), and big cameras neither (too small frame). So you need to find your own solution to that.

It's half the price of the original, so well, you get what you pay for. With some small adjustments however, they could make this frame much better.

but maybe this one is better?

deadmoo   Nov 16, 2019 

This is not an exact copy but the dampers on this one seem to work well on this clone.

Sasquads   Sep 11, 2019  

How's the performance? Still want to build one, but I think the frame, especially with TPU prints is kind of heavy.
Is it?

deadmoo   Sep 11, 2019 

It is okay. It is probably just a little bit worse compared to Furibee X140 that I salvaged the parts from.

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more