Rooster 6" Blaster

By wrong17 on Feb 10, 2019

5  426  0

After getting the Hypetrain motors I wanted to build a quad that could take a beating because I have babying my quads for too long. I guess we need to step out of our comfort zone to grow and get better. We all already know that the Armattan offer a lifetime warranty on the Rooster frame but after hering about the new “fly hard replacement program” Hypetrain is offering with the motors. That pretty much sealed the deal with this new build. Believe it or not, this is my 4th Rooster build.

Initially all the electronics was from a previous Chameleon Ti build, but one thing led to another (more details on my Chameleon Ti build) and I transplanted to a Rooster frame instead. The transplant went well until I crashed it and broke a motor. I must give props to Hypetrain because the replacement process was very easy. Within a few days the new motor arrives from RDQ. After replacing the motor, I had some other issues that prompt me for another rebuild to reduce the weight.
The Rooster ended up weighing 46g more when the guts of the Chameleon Ti. I was thinking if I switched to a 4in1 I would lose some weight and so how I ended up with a Flycolor X Tower. What the heck is that? It was on sale at HobbyKing during the Super Bowl, plus they had a 20% off sale. After it arrived, I noticed something strange about the FC, it is a solderless. Apparently, something like that exist. Everything is plugged in to the board and no soldering pads. It came with a bag that included different plugs, and some of them might work directly with popular hardware like the TBS Unify VTX. But unfortunately, this time I am trying out RDQ’s Mach 3 so I had to cut the connector off and solder it directly to the VTX.

Be warned, the Flycolor X Tower does not fit the Rooster frame unless you turn the ESC 90 degrees either to the left or right because the soldering points for the power cable is sticking out of the side. So, this board is perfect for people who likes the battery plug coming out from the side of the quad. Just don’t for get to remap the motors in CLI so they are positioned correctly.

In my case here is how I had to remap the motors when I rotated the ESC counter clockwise 90 degrees:

1 > 3
2 > 1
3 > 4
4 > 2

All I had to type in CLI is:

resource motor 1 A03
resource motor 2 B00
resource motor 3 A02
resource motor 4 B01
save

But keep in mind that it only works if your motor’s original resource ID is the same as mine:

B00: MOTOR 1
B01: MOTOR 2
A02: MOTOR 4
A03: MOTOR 3

All this info is just for me to remember if I ever flash the firmware and if it works for you too, great.

For some reason I was not able to get Crossfire working with UART6. I was going to try UART3 to see if I had the same problem but I switched everything over to a FrSky R-XSR because I just wanted to get the Rooster up and running ASAP. The Crossfire was pulled for another quad so I was working fine and it bound to my radio without any problem. I just could not get it read in Butterflight.

Here is a video of my very first test flight with stock PIDs and Rates. It was a cold and windy day, but I think I turned out okay. I forgot to turn on Smart Audio on the VTX so I was stuck at 25mw and I did not fly too far away.

After the first flight I have to say the Flycolor X-Tower 40A is a good stack. It is a F4 FC with BlHeli 32 ESC, has clean video and it flies just as well at my Helio Spring board on stock PIDs and Rates. Today I just watched a video from KababFPV (Tuning: Early 2019 - Quad Tips) about changing the TPA in betaflight to reduce the propwash flutter. I will have to give that a try when the weather gets better.

Update (Feb 13, 2019) TBS Crossfire Works!
After reviewing my pictures I figured out my mistake. It was the wiring for CH1 and CH2 on the Nano receiver, here is the correct wiring:
CH1 > TX6
CH2 > RX6
I am using UART6 for the Crossfire Receiver and UART3 (TX3) for Smart Audio.

Update (Apr 28, 2019) Switched Hardware!
A few things have changed since I finished building the Rooster.

  • HD Camera: GoPro Session 5 > GoPro Hero 7 Black
  • FPV Camear: Foxeer Monster Mini > Foxeer Falkor Micro
  • Props: Gemfan Flash 5552 > Gemfan Flash 6042

I did not write about the new additions to the Rooster, but to make a long story short I end up adding a 3d printed mount for the Mach 3 VTX and Crossfire Nano RX and switched to a Foxeer Lollipop MMCX antenna. I was worried that I with loose some signal quality when I went a short antenna, but I did not notice a difference.

Recently I upgraded my Fatshark Dominator V3 goggles to an HDO and I did not think I would bother me that all my FPV cameras are 16:9 (Foxeer Monster), but it did. I happen to have a few Foxeer Falkor laying around and when I tried it with my new setup, I was very impressed. Like with all the other Runcam I tried in the past the colors seem off. I had friends raving how good the Micro Eagle is, so I gave RunCam one more try. The only reason why I did not buy more Falkor camera is because of the high latency. To be honest, I am not a racer and I did not notice the latency when I used it. But still, I bought 2 Runcam Eagles and I am sad to say, I did not like it at all and end up going back to a Falkor. All the Foxeer cameras are stock settings and so is the Eagle. I tried a few different custom configurations I found for the Eagle and still not that much better. I did not have any problems like the Light and Dark issues people had with the Eagle, I just did not like the color, and everything seems darker. Because of those characteristics the DVR video also looked bad.

Photos

Part List

Frame

Armattan Rooster 6" Frame (15 builds)
Racedayquads.com
$95.00

Flight Controller

Flycolor X-Tower 40A (F4 Flight Controller w/40A 4in1 BL_32 ESC) (2 builds)
Hobbyking.com
$67.00

Motors

Hypetrain Blaster 2207 2450KV Motors by Rotor Riot w/ Fly Hard Replacement Program (16 builds)
Racedayquads.com
$26.95

Propellers

Gemfan Flash 6042 Durable 3 Blade Propeller (Set of 4 - Clear)
Getfpv.com
$3.99

FPV Camera

Foxeer Falkor 2 Micro FPV Camera - 1.8mm Lens - 1200TVL 16:9/4:3 PAL/NTSC G-WDR - Choose Your Color (75 builds)
Racedayquads.com
$36.90

FPV Transmitter

RDQ Mach 3 Video Transmitter 25-1000mW 5.8GHz VTX - U.FL or MMCX (146 builds)
Racedayquads.com
$24.99

Antenna

A Pair Foxeer Lollipop 2 RHCP MMCX Right Angle/Straight 5.8G 2.5dBi FPV Antenna For FPV Racing Drone (15 builds)
Banggood.com
$19.90

Receiver

Team BlackSheep TBS Crossfire Nano RX - Heli-Nation (1499 builds)
Heli-nation.com
$24.99

Batteries

RDQ Series 14.8V 4S 1500mAh 100C LiPo Battery - XT60 (59 builds)
Racedayquads.com
$23.99

Radio

Team BlackSheep TBS TANGO 2 V3 PRO RC RADIO (107 builds)
Heli-nation.com
$199.99

Goggles

DJI Goggles 2 (8 builds)
Racedayquads.com
$648.99

HD Camera

GoPro Bones - HERO10 Black (FPV Lightweight Drone Camera) (3 builds)
Gopro.com
See Site

Misc Parts

Ultimate Armattan Rooster Collection (R-XSR, TBS Crossfire nano, AKK X2 Ultimate, RDQ Mach 2, GoPro Session, LED strip, Antenna)
Thingiverse.com
See Site

Misc Parts

Armattan Rooster Gopro mount by shawn1145
Thingiverse.com
See Site

Misc Parts

Armattan Chameleon Ti - Arm and soft Motor mount / landing gear by Smtechmatane
Thingiverse.com
See Site

Misc Parts

Armattan Rooster Axii & Immortal T Antenna Mount v2 by SaranWrap
Thingiverse.com
See Site

Battery Charger

HOTA F6+ 1000W 60A 1-6S Quad Channel AC/DC Smart Charger - Grey
Racedayquads.com
$185.99

Battery Charger

HOTA D6 PRO Dual Charger 1-6S AC200W/DC650W 15A w/ Wireless Cellphone Charging - Black (14 builds)
Pyrodrone.com
$117.98

Soldering Iron

TS100 Portable Programmable Smart Soldering Iron (265 builds)
Racedayquads.com
$58.99

Backpack

Lowepro QuadGuard BP X3 - Drone Backpack for 4 FPV Quad Racing Drones and 15" Laptop w/Exterior Mounts (Black)
Amazon.com
$286.00

Accessories

iFlight Crystal HD Patch and Stubby 5.8GHz RP-SMA Antenna Set for DJI - LHCP - Carbon
Racedayquads.com
$56.99
Show stores (9)

Discussion

Sign in to comment

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more