Ummagawd Acrobrat

By gulzaar on Oct 04, 2018

8  1,273  2

Ever since I first saw the Acrobrat introductory video from Ummagawd, I was in love.

The Rotor Riot build video was also very helpful.

Before getting into build notes, a pitfall: If you use the gummies, the mounting holes are for smaller screws - if you have normal hardware you use on 5 inch quads, the bolts and nuts will be too big for this build. I had to use the extra hardware from the Runcam Split Mini in order to complete this build.

On the whole, this is a really well thought out frame and really fun to build. The motors are quite a distance away from the body so there is plenty of prop clearance everywhere, even with the antenna tubes sticking out as much as they do.

The feet make a good addition cosmetically as well as for landing - if you don't use the feet, the first part to touch the ground will be the flight controller stack bolts, which is not a great idea.

The mount at the back is also 3D printed, and the standoffs slide right into it with a little effort. It helps to keep the VTx and RX antennas nice and secure, as there is not much other place to run them/mount them.

In the build video, Tommy recommends mounting the cap on one of the arms, and zip-tying the XT60 to the side plate, which I've done. I like the location of the XT60 here, it's secure and will help keep the power lead from the battery going all over the place, too.

Since there are effectively 5 boards to mount(ESC, FC, Split Mini, VTx, and RX), it's quite a tight build once everything is in - but with a little planning, everything fit pretty well. The only thing I am concerned about is the ribbon cable, which is sensitive anyhow and I am not sure how well it will hold up to abuse.

AUW is 310 grams with props.

With 3030 x 3 RaceKraft props, these motors were nice and speedy but felt a slight bit underpowered. I think once my 3050 x 3 props come in it should be a lot better. On a stock tune, there was no jello whatsoever! Once the props were very beaten up, there was just a slight bit of jello, barely noticeable.



Sign in to comment

sergetania   Oct 04, 2018  

310g with what battery?

gulzaar   Oct 04, 2018 

a local brand 4S 850

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more