Armattan Rooster 5 Inch

By NoakFPV on Oct 10, 2018

3  434  2

New freestyle build! Converted Parts from my DXL NitroX to the Armattan Rooster frame.


Part List


Armattan Rooster 5" Frame5" (140 builds)

Flight Controller

HyperLite F4 OSD V2 F4 Flight Controller with VTX Pit Mode (16 builds)


Spedix IS30 30A 2-4S 30x30 4in1 ESC w/ BEC (88 builds)


4 x EMAX Lite Spec LS2207 2550kv Racing / Freestyle FPV Motor (53 builds)


HQ Prop 5x4.3x3 V1S Tri-Blade 5" Prop 4 Pack - Choose Your ColorBlue (355 builds)

FPV Camera

Foxeer Arrow Mini Pro 600TVL CCD 4:3/16:9 PAL/NTSC FPV Camera (2.5mm or 1.8mm) - Choose Your Color and Lens (19 builds)

FPV Transmitter

TBS Unify Pro 5G8 HV (SMA) (596 builds)
See Site


Lumenier AXII Stubby 5.8GHz Antenna (RHCP) (232 builds)


FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM (481 builds)
See Site


FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2) (52 builds)


Fat Shark Dominator V3 FPV Goggles (63 builds)


M3 x 7mm Anti-Vibration Flight Controller Soft Mount Standoff 4 Pack (32 builds)

Video Receiver

Furious True-D Diversity Receiver Module 5.8GHz System V3 Firmware 3.9 (30 builds)

Battery Charger

EV-Peak A1 100W 10Amp Touch Screen NiMH / LiPO Battery Balance Charger


RDQ 9 Piece Drone Racing Tool Kit (8 builds)
Show stores (2)


Sign in to comment

MarkOne   Oct 23, 2018  


How have you mounted the AXII Stubby on the back of the Rooster there? Are you using the included rubber grommets? I have a similar setup (on a Chameleon Ti, which I believe has the same back end) and including the grommet prevents a full connection but excluding it leaves a gap that prevents a solid fit...

NoakFPV   Oct 31, 2018 

I am actually using the carbon pigtail mount. It is the one without the gromet. This AXII is actually too wide to screw on all of the way because the plastic surrounding the SMA hole hits the screws that mounts the SMA connector from the VTX in place. This inhibits a full connection. I am still trying to find a solution. Most likely I will use a different antenna.

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more