Martian 6" Budget Slammed Rebuild

By cutthenoise on Jun 06, 2018

19  2,024  15

This is a rebuild of my very first 5" quad. Still going with a very budget build, with some simple added bells and whistles (racewire, racelites). I upgraded the old budget motors (racerstar 2205) to the newest budget motors (Samguk 2306 2500kv). I dropped in the cheapo 35A AIO ESC which has worked well for me on my other 5" build so far. I have the 6" arms on this for some prop flexibility and clean air flow. I'll probably fly it on 5"-5.5", but I might experiment a bit with 6" too. Maybe too high KV for 6"? Not sure, will experiment. I also managed to slam the frame down to 20mm which I like quite a lot. Using the new Frsky X-lite with it (normally use Spektrum). I feel like my builds are getting a bit cleaner and more tidy which makes me feel good inside. XD

Maiden Flight here:

Photos

Part List

Frame

Anniversary Special Edition Martian 215 215mm Carbon Fiber RC Drone FPV Racing Frame Kit 136g (51 builds)
Banggood.com
$21.99

Flight Controller

Omnibus F3 NANO STM32F303 2-4S Flight Controller 20*20mm 3.7g Built-in 5V 3A BEC OSD LC Filter for RC Drone (3 builds)
Banggood.com
$17.99

ESCs

Anniversary Special Edition Racerstar REV35 35A BLheli_S 3-6S 4 In 1 ESC Built-in Current Sensor for RC Drone (117 builds)
Banggood.com
$34.05

Motors

4 x DYS Samguk Series Shu 2306 2250KV 2500KV 2800KV 3-4S Brushless Motor for RC FPV Racing Drone (29 builds)
Banggood.com
$39.96

FPV Camera

Foxeer Predator Micro V4 1000TVL 16:9/4:3 NTSC/PAL CMOS FPV Camera w/ OSD PLUG VERSION - Choose Your Color & Lens (149 builds)
Racedayquads.com
$23.09

Antenna

AOMWAY 5.8G 3dBi RP-SMA Male Four Lobe RHCP VTx/VRx FPV Antenna (60 builds)
Banggood.com
$9.90

Receiver

Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone (1534 builds)
Banggood.com
$13.69

Batteries

CNHL 14.8V 4S 1500mAh 100C G+ Plus LiPo Battery - XT60 (53 builds)
Racedayquads.com
$23.49

Radio

Jumper T8SG V2.0 Plus Hall Gimbal Multi-protocol Advanced 2.7" OLED Transmitter for Flysky Frsky (7 builds)
Banggood.com
$125.00

Radio

FrSky X-Lite 2.4GHz Radio Controller (Red) (64 builds)
Getfpv.com
$121.99

HD Camera

GoPro Hero5 Session (300 builds)
Amazon.com
$739.00

HD Camera

GoPro HERO4 Session Video Camera GPCHDHS-102 (42 builds)
Phaserfpv.com.au
$164.94

Misc Parts

Racewire - PCB Motor Wires (6x Full Size) (21 builds)
Tinysleds.com
$6.00

Misc Parts

4 x Martian I II 190mm 230mm 255mm Carbon Fiber 4mm Arm Kit for RC Drone FPV Racing (2 builds)
Banggood.com
$14.36

Misc Parts

Micro FPV Cam Mount (14 builds)
Brain3d.co
$3.00

Misc Parts

2 x Racelite LEDs for RaceWire (9 builds)
Tinysleds.com
$3.80
Show stores (7)

Discussion

Sign in to comment

Zzyzx   Jan 24, 2019  

Which arm size did you use for 6", the 255mm arms? Which "standoff width" option did you use for the Micro FPV Cam Mount? Also, when you slammed it, did you just not use the X braces in the front and only use the standoffs, or did you add something else? Thx!

cutthenoise   Jan 28, 2019 

Yes, 255mm arms. I don't remember the standoff width. I think I measured it. If I understand your question correctly, I just used the standoffs and didn't use the other braces (too tall.)

Zzyzx   Jan 28, 2019 

Cool, thanks. Yeah, sorry I wasn't asking about the standoff width, I figured they were standard standoffs. Just curious if it was OK to leave the carbon fiber side braces off, seems like it was. Looks cool slammed, and at the current prices, a real bargain frame. Thx!

Andre1102   Jun 14, 2018  
1

how did you mount the FC?

cutthenoise   Jun 15, 2018 

I used a 3D printed TPU mount that allows you to mount a 20x20 board on a 30x30 stack. I got it from catalyst machineworks.

galken   Jun 12, 2018  

What battery do you use??? how many calls and how many mahs and what brand.
Contact: http://colorswitch2.com

cutthenoise   Jun 14, 2018 

I have some Tattu that are 1300mah 4S. And I recently got some 1500mah 4S CNHL that I like too.

Whiffles   Jun 07, 2018  
1

Nice job! Are those 20mm standoffs?

cutthenoise   Jun 08, 2018 

Thanks! Yes indeed. Loving it slammed.

Whiffles   Jun 08, 2018 
1

It's the best way to go with the Martian!

cutthenoise   Jun 08, 2018 

Yes agreed!

Jodie Froster   Jun 07, 2018  
1

This whole thing is dope start to finish

cutthenoise   Jun 08, 2018 

Thanks! Yeah I'm pretty happy with it.

FreeKill998   Jun 06, 2018  
1

the 3d printe part for the antenna /sma connection, do you have a link to that

cutthenoise   Jun 08, 2018 

It is antenna only, but from Brain3D. Gopro mount is rom Brain3D too. Good stuff there.

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more