TBS Raggio Lungo 7"

By lazd on Feb 23, 2018

38  2,232  17

A full TBS Raggio Lungo build with 7" props.

I was impressed at how easily the build came together, with the GPS, Crossfire, and camera plugging into the TBS Powercube Elite stack with the provided cables and no soldering! The only things I soldered on the build were the pigtail, ESC power/signal/ground, and the massive capacitor bank I added for 5S/6S compatibility.

Once installed, the FPVision setup screen came up, and it took just a moment to get it all set up, then everything just worked out of the box. I did have to configure a channel to send Link Quality, then select PPM as the source under the OSD > RSSI configuration menu, but then I was basically done. I couldn’t believe how easy it was to get going thanks to TBS’ tight integration with all its components. The only thing missing is SmartAudio control of the VTX with LUA scripts, otherwise, it’s perfectly integrated.

Want to win a Raggio with this exact gear?

Hit https://www.facebook.com/velocidroneracingleague/ to see contest rules, ends April 26th!


Part List


Raggio (10 builds)

Flight Controller

TBS POWERCUBE FC - Colibri RACE 2.0 (6 builds)


4 x TBS BulletProof 25A DSHOT600 ESC BLOWOUT (31 builds)


4 x TBS ENDURANCE Motors (3 builds)


Gemfan Flash Durable 2 Blade 7042 - Black (5 builds)

FPV Camera

RunCam Micro Swift (198 builds)

FPV Transmitter

TBS Powercube FPVision (13 builds)


TBS Triumph 5.8 GHz Antenna - SMA (364 builds)


TBS Crossfire Micro RX V2 (285 builds)

Power Distribution



FrSky Taranis QX7S 2.4GHz RC Transmitter - Carbon or Blue (50 builds)


Fat Shark Dominator HD3 Core FPV Goggles (83 builds)

HD Camera

GoPro HERO6 Black (9 builds)

HD Camera

GoPro HERO5 Session (300 builds)

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (182 builds)

Battery Charger

ISDT SC-608 150W 8A MINI Smart LCD Battery Balance Charger AU Warehouse (14 builds)

Soldering Iron

Weller WESD51 Digital Soldering Station
See Site
Show stores (9)


Sign in to comment

QuadX   May 20, 2019  

Hey mate, loving this frame! One question - would it be possible to fold the front and rear arms forward? Then bolt them back into place using a wing nut or similar?

lazd   May 20, 2019 

Yup, I can't see any reason why that wouldn't work. You'd just need to loosen the inner screw and remove the outer screw.

SFPV   Apr 20, 2018  

GO TO https://www.facebook.com/velocidroneracingleague/ TO SEE CONTEST RULES. ENDS APRIL 26TH

ypeeLs   Feb 24, 2018  

Do any of the 3D printed parts come with the frame?

Show 3 more comments
ypeeLs   Feb 27, 2018 

One last thing before i bite the bullet, will the Micro Eagle fit in the turret?

lazd   Feb 27, 2018 

It'll fit just fine, though with the bigger lens, the camera angle may be higher than you want. You can always shave the turret with an Xacto to get it lower though!

ypeeLs   Mar 02, 2018 

Alright I placed my order! I think I'm going to go with the Beitian BN-880 for GPS

RocketSquidFPV   Feb 28, 2018  

Holy flying fuck that looks awesome. Any words for how the powertrain feels?

recon   Feb 26, 2018  

Hell yeah LAZD! Clean build. Definitely grabbing this frame for my tax refund fleet. Any clearance issues with a Hobbywing F4 stack or should I go back to individual ESCs?

lazd   Feb 26, 2018 

Awesome! No issues with the Hobbywing stack, it'll fit perfectly with the included 20mm standoffs! That said, I bet your motor wires aren't long enough, heh.

recon   Feb 26, 2018 

You know it, lol. That's where the Racewire comes into the picture. Gotta love progression. Thanks for the quick reply!

Denis   Feb 25, 2018  

Looks absolutely phenomenal for cruising! Mind sharing recommended batteries & expected flight times?

lazd   Feb 25, 2018 

Not yet! I did about 5:30 on my 6" Raggio with an 1800mAh 6S on HQ 6x3x3 V1S at cruising speeds of around 70 knots, so I'm excited to see what I can on 7" with an even lower kV!

Whiffles   Feb 26, 2018 

Looking forward to hearing about the flight times. Also, any jello in the video?

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more