Super Whoop V2

By peacemaker on Feb 08, 2018

7  771  3

I’ve found a better way to build it. Keeping the weight under 29g is important to the flight characteristics. To install the motors rotate them and run the screws through the triangles. The center holes need to be drilled out to clear the bearings. Remove the female connector on the motor pads.

I used the b06 canopy and props.

Discussion

Sign in to comment

Alloy907   Mar 11, 2018  

Building very similar drone. Had bad experience with Boldclash 0603 motors, going to replace them with Sunnysky0703. What is your flight time? How quiet are these motors?

peacemaker   Mar 11, 2018 

Flight time is about 4:30. The motors are very loud. The sunny sky motors have a different bolt pattern. So you’ll have to use the spaces between the holes as well as drill out the center hole.

MicroManiac   Feb 08, 2018  
1

Great idea.

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more